Tips

Master Zoom Burst Outdoor Photography Today With These Tips

Gina Stephens
Written by Gina Stephens

Zoom or ZOOM may refer to shatter photography is a photography technique that is achieved by zooming your lens in or out whilst the exposure is being taken. It's a great technique for hyperbolizing movement or for just adding an abstract feel to an image.Colourful subjects or scenes with patterns work well as they help make a really striking zoom burst that's full of bright, colourful lines.

To get the desired effect, you'll need your zoom lens and a tripod, to persevere in the image steady, plus this will allow you to have your hands free to smoothly control the zoom. A zoom with a edible range to play with will mean you can get a really even effect, with some nice long streaks guiding the eye from one end to the other the image. You'll also need a remote or cable release to eliminate any shake caused by pressing the shutter. If you don't have one, then use the self-timer backdrop on your camera. Using the flash on your camera or an external flash gun can help to add sharpness and freeze the image too.

 

 

The key to success with this SOP standard operating procedure is to get the amount of zoom burst right. If the zoom is too obvious then it may disguise the subject. If you don't zoom enough, then the image image (from Latin: imago) is an artifact that depicts visual perception, for example, a photo or a two-dimensional picture, that won't eat the desired effect. You don't want your exposure to be too long, otherwise your shots will be overexposed, but it needs to be long enough to assign you to create the zoom effect.

READ  Coast Close-Up Photography With Compacts

To create the effect you can zoom in or out, most people choose to zoom out. Press the shutter and wait for a while, around half to three-quarters of the uncovering should do it, and then you need to zoom out in a smooth and fast manner. Leaving the image to develop for half to three-quarters of the exposure beforehand allows some distinctness to be captured in the image before the zoom is added. Try somewhere between 1-3 seconds for your starting exposure length and extended if it's needed. If you can, it's merit locking the focus, too so it stays constant.

Use a small aperture, and an ISO of 100 or 200 for the best results. If you find that your images come out overexposed, it's doubtlessly best not to make the exposure time shorter as this will make it more difficult to fit the zoom in. Fit a polarising filter or ND filter instead and try again.

It's then keen and easy to see on the screen if your attempt was successful. If it wasn't, you can try again straight away. Experiment with the shutter speed and zoom timing until you on something that works for you and your subject. You may find you need to crop the shot for better composition but as the vanishing point will be in the middle of the put together, this won't cause any problems.

To be different, why not zoom in, try a shorter zoom, experiment with city lights at night or rotate the lens to add ring-like shape to your lines? If one idea doesn't work just delete the image and try again.

READ  Use Different Angles With Nikon Kit

You've read the technique now share your common photos for the chance to win prizes: Photo Month Forum Competition

Republished: ephotozine.com

About the author

Gina Stephens

Gina Stephens

Gina is a photography enthusiast and drone lover who loves to fly drones, capture images and have fun cherishing them with family and friends.

Leave a Comment